WAITING LIST SIGN UP FORM ​​

MY 9mm 3GT END LINK KIT

6 NEEDED

3 NEEDED

(I will ship to anywhere, but you are paying for the actual shipping cost)

NEW - 2/19/2018

The clips are 20mm X 30mm X 17mm

The covers are 21mm X 19mm x 3.286mm

GATE TIMING BELTS ARE LISTED AS:


TOOTH PITCH - GT - GENERATION


SO 3GT3 IS 3mm PITCH, 3RD GENERATION (STRONGER REINFORCEMENT MATERIAL)

INCLUDES:


  • 3 LEFT FACING AND 3 RIGHT FACING CLIPS (ENOUGH FOR 3 BELTS)
  • ​6 COVERS
  • ​3 M5x30mm HEX HEAD SCREWS, M5 WASHERS, & M5 LOCK NUTS FOR TENSIONING
  • 6 M5x20mm SOCKET HEAD SCREWS FOR LOCKDOWN
  • ​6 M3x20mm SCREWS & LOCK NUTS FOR COVERS
  • ​​PRINTED IN BLACK
  • 12 ZIP TIES

+ $8 shipping inside U.S.A.

TURN KEY ORDERING PAGE

First come first serve basis. I will email you and let you know where you are in line. Shortest time is 1 to 2 weeks. Please be patient. I will do my best. No money is exchanged until it's ready to ship. I will then send an invoice to your email address when ready.

By submitting this form, you are agreeing to purchase once it's ready to ship. It may be a long wait if many are interested. I will do my best to keep the wait short. if at anytime you whish to be removed from the list, please email me and let me know!

Thank you!!!

I tension my 9mm wide 3GT3 belts to 3.8lbs at an inch lift in the middle of a 1000mm rail. This is reference only. I am not responsible for damage to your machine if you use my numbers.

Use the included zip ties to clamp the interlocked belt teeth together. 2 per belt end. The belt end clip should be close enough to the end plate that you can home the machine without hitting the clip. You may want to put the tensioner side on the back of the machine.

DESIGNS BY PHIL, LLC

3 NEEDED - CUT TO MAKE OPEN ENDED

One person has experienced the 30mm hex head bolt slip inside the slot. though this is probably an isolated incident and was only on one end clip, I designed a plug to be glued into place to completely lock the hex head from all side. If you do experience slipping, you can also just flow some super glue into the slot. It will take up all the space. I will test and include 3 of them with all orders once verified.

RECOMENDED PARTS:

WAITING LIST SIGN UP FORM AND INFORMATION FOR COMPLETE CLIP PACKAGE

Assembly diagram

Click to enlarge

$25