SPIRAL WALKING STICK 1

ADDED 2/1/2019

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. Designed for rotary CNC machines.

$10

MOLD MODELS

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. Designed for rotary CNC machines.

INCLUDES:


  • ​8 INDIVIDUAL MOLD MODELS
    • 4 INCH ROUND DEEP AND SHALLOW
    • 4 INCH SQUARE DEEP AND SHALLOW
    • 5 INCH ROUND DEEP AND SHALLOW
    • 5 INCH SQUARE DEEP AND SHALLOW

ADDED 1/24/2019

This is a cane 36" tall. Designed for rotary CNC. It features a T handle on top of a 3 part tapered spiral which merges together towards the bottom. 

 Perfect for V9.5 Vcarve Desktop (tiled​) or Pro's rotary tool paths!

This is a 3 piece set in 4 sizes for a total of 12 STL files. Each set has a pin, ball, and pin bottom trimming jig for slicing off the bottom post on your table saw perfectly square. The jig can be 3D milled or 3D printed. the sizes are FULL, THREE QUARTER, HALF, and QUARTER scale. Quarter scale is great for kids and on top of pool tables! The pins are approx. 1.8" in diameter. Perfect for a 2" poplar dowel. Full size are regulation dimensions.

 Perfect for V9.5 Vcarve Desktop's new rotary tool paths!

For my file sales, I am taking the taxes out on my end so you will not see the newly required sales tax on all internet sales (new Wisconsin state law).

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

ADDED 1/14/2019

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

 Perfect for V9.5 Vcarve Desktop or Pro's rotary tool paths!

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. Designed for rotary CNC machines.

SQUARE AND TWIST TABLE LEGS

DESIGNS BY PHIL, LLC

INCLUDES:


  • ​9 INDIVIDUAL MODELS      NOW WITH 15 STL FILES!!
    • 2 TYPES OF 2 INCH COOKIES
    • 2 TYPES OF 3 INCH COOKIES
    • 3 TYPES OF 10 PIE CRUST WITH AND WITHOUT SLICES
    • 2 BLANK ROLLING PINS
    • 6 BONUS SKINNY ROLLING PINS! (1.875" Diameter)

 ROTARY CNC MODELS

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

After payment, you will receive 2 emails with a single zip folder in each. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

 Perfect for V9.5 Vcarve Desktop (tiled​) or Pro's rotary tool paths!

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. Designed for rotary CNC machines.

After payment, you will receive 1 emails with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. Designed for rotary CNC machines.

$15

MOST FILES NOW AVAILABLE ON ETSY AS INSTANT DOWNLOADS!!!

 Perfect for V9.5 Vcarve Desktop (tiled​) or Pro's rotary tool paths!

$8

With Vcarve Desktop V9.5  adding rotary tool paths, I'll be expanding my 3D files!

ASH TRAY MOLD

$15

 Perfect for V9.5 Vcarve Desktop's new rotary tool paths!

ROLLING PINS

ADDED 1/3/2019

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. Designed for rotary CNC machines.

Bonus text stick (Click to enlarge)

ADDED 1/3/2019

This is a model 39.81" tall. Designed for rotary CNC. It features a 1.81" ball on top of a 3 part tapered spiral which merges together towards the bottom. At the bottom is a 1" long 1/2" diameter peg to attach an extension to. This would be great cut from a 2" diameter dowel rod.

This is a walking stick is 38" tall. Designed for rotary CNC. It features a blank area on top which is designed for another STL file to be merged with it in Meshmixer. There are 2 versions. One with a bonus text modeled on it which you will have to find the STL to mesh with it!

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

$10

This is for  STL ONLY files of the items below. You can use meshmixer to combine them and save as one STL file that you can import into Vcarve Desktop or Pro. 

ADDED 9/25/2017

BOWLING BALL, PIN, AND JIG

SPIRAL CANE 1

VINY WALKING STICK 1

INCLUDES:


  • ​4 INDIVIDUAL MODELS
    • 2 SOLID IN THE MIDDLE
    • 2 CUT THRU IN TH MIDDLE
    • ALL 24.5" LONG FOR USE IN VCARVE DESKTOP. CAN BE STRETCHED LONGER OR SHORTER.

WANT TO BUILD A

ROTARY DEMON CNC MACHINE?

$10

MOLD MODELS

ADDED 1/14/2019