9mm 3GT END LASER CUT STEEL LINK KIT

THESE ARE THE STRONGEST AND BEST QUALITY END CLIPS ON THE MARKET!!!

​DON'T BE FOOLED BY BUNDLING GIMMICKS WITH CHEAP NO-NAME PULLEYS AND BELTS. BUY FROM KNOWN SUPPLIERS WITH NAME BRAND PARTS. LINKS ABOVE.

LOOKING FOR 269oz STEPPER MOTORS?

6 NEEDED

Computer designed and simulated using industry's top modeling software! Can withstand over 200lbs of force from the belt. Your belt will break long before these clips!

Price change

3 NEEDED - CUT TO MAKE OPEN ENDED

** UPDATE 9/4/2018

RECOMENDED PARTS:

PURCHASE SIGN UP FORM AND INFORMATION FOR COMPLETE CLIP PACKAGE

INCLUDES:


  • 6 LASER CUT 16 GAUGE STEEL END CLIPS POWDER COATED BLACK (ENOUGH FOR 3 BELTS)
  • ​3 M5x25mm BUTTON HEAD SCREWS, M5 WASHERS, & M5 LOCK NUTS FOR TENSIONING
  • 6 M5x8mm BUTTON HEAD SCREWS FOR LOCKDOWN
  • ​3 M5x10mm BH SCREWS AND M5 LOCK NUTS TO SECURE NON TENSION CLIPS TO END RAILS​​​
  • 14 ZIP TIES (2 EXTRA)

There's little tracking information with international shipping and I have to fill out additional paper work, so shipping may take longer than the typical 3 to 4 days.

Here are pictures of the finished clips powder coated

ORDERING PAGE

(click to enlarge)

$20 MAXIUM VALUE. NO CASH VALUE FOR CHOICES NOT ADDING UP TO $20.

Files emailed 24 to 48 hours after full payment is received.

Use the included zip ties to clamp the interlocked belt teeth together. 2 per belt end. The belt end clip should be close enough to the end plate that you can home the machine without hitting the clip. You may want to put the tensioner side on the back of the machine. The end where the belt is will bend up when tightened. That is normal.

By submitting this form, you are agreeing to purchase. Check notes above for current wait time. I will do my best to keep the wait short for future batches by ordering a head of time.

Thank you!!!

BETTER QUALITY THAN ANY OTHER ON THE MARKET. LASER CUT BY MAJOR FABRICATION COMPANY, NOT PLASMA CUT AND ADVERTISED AS LASER CUT LIKE OTHERS. FEA TESTED. POWDER COATED BLACK TO MATCH THE X-CARVE.

Aligning pulleys:

you may need to jog all the way back and forth a few times to see if the belt stays away from the toothed pulley's edges. do not use Loctite until you are sure of the alignment. as you can see in the pictures above, it takes the spacer and precision shim to get the idler pulley out far enough.

I tension my 9mm wide 3GT3 belts to 3.8lbs at an inch lift in the middle of a 1000mm rail. This is reference only. I am not responsible for damage to your machine if you use my numbers.

search "1536-3mgt-09" to find your own supplier

DESIGNS BY PHIL, LLC

PURCHASE FORM ​​

(This shows which direction it would deform, not what it would look like at tested force. The end where the belt is will bend up when tightened. that is normal)

NEW LOW PRICE!!! NOW ONLY $19.99... AND YOU STILL GET FREE FILES!!!

* You must stay on this page while filling out the form. It will not allow you to submit if you change pages. please select and write down your file choices PRIOR to starting the form.

(I will ship to anywhere, but you are paying for the actual shipping cost)

I will be receiving the first batch approximately 5/23/2018. I will need a few days to clean, powder coat, and package. If you sign up now, you will be sent an invoice upfront. Please pay it promptly. Yes, you will be paying a week or so before they are do to ship, but it's necessary to be able to process such a large batch. Please be patient. You will be notified when I receive them and when they ship.

WITH PURCHASE OF END CLIPS!!!

TIPS AND PICTURES:

$19.99

* You must stay on this page while filling out the form. It will not allow you to submit if you change pages. please select and write down your file choices PRIOR to starting the form.

​​First come first serve basis. I will email you and let you know where you are in line. Check notes above for current wait time. Please be patient. I will do my best. I will be sending an invoice to your email address as soon as you sign up. Please pay it promptly.

Verified Shipping Costs Outside USA


​Location                                 Cost

French Polynesian (Tahiti)........$15.00

​Birmingham, UK..........................$15.00

​Sydney, Australia........................$15.00

For adding set screw pulleys:

* Make sure all specifications are exactly what you want including shaft size.

3 NEEDED

THE ORIGINAL

(CHECK AVAILABILITY BEFORE ORDERING! Royal Supply (supplier 2) have been back ordered frequently)

ORDERING PAGE

Here are pictures of the raw unfinished clips received from the laser cutters. Look how clean those cuts are!! that's how you can tell a true laser cut part from a plasma cut by the smooth small burn edge/line. a plasma cut will be jagged and unevenly burned. do not be fooled by imitations! look at pictures of my competitors and you will see they actually plasma cut theirs, not laser cut. Also you may note other imperfections on theirs like uneven radius corners.

GET UP TO $20 WORTH OF CARVING FILES FREE 

Only make 1 flat. If you make 2, they will fight each other. Use M3 socket head screws not the set screws. Use blue loctite after it's all lined up and verified. Remove one screw at a time when adding loctite so one is always holding.

GATE TIMING BELTS ARE LISTED AS:


TOOTH PITCH - GT - GENERATION


SO 3GT3 IS 3mm PITCH, 3RD GENERATION (STRONGER REINFORCEMENT MATERIAL)

+ $8 shipping inside U.S.A.