2D Files 4 Sale

EXAMPLE ONLY! ONLY 19 BLANK SIGN PANEL DXF FILES INCLUDED IN PACKAGE

LAYERED EAGLE SCOUT/

ADDED 7/26/2018

ADDED 10/11/2017

$5

ADDED 9/17/2018

TOAD STOOL (FROG) PLANS

ELEPHANT DXF AND SVG SIGN

ADDED 10/11/2017

(except for brass plaque)

$10

$15

TURKEY NAPKIN RING DESIGN

** NOTE: Yes, there are other people out there making these tables. But this is MY design. I got a tape and traced and measured it in autocad. I designed this to be made from Plywood AND solid hardwood, not just plywood.

SCOUTS AWARD SVG SIGN

$20

ADDED 10/11/2017

This is for an SVG AND DXF FILE of the item below plus detailed PDF plan. This is designed to be made from 0.75" thick material (you may have to adjust the pockets for your material). All dog bone joints are hidden once assembled. All pockets to be milled 0.505" to 0.51"deep. THIS IS DESIGNED TO BE ABLE TO BE MADE WITH A 1/4" BIT. Finished stool is approx. 20" X 11" and 10" tall.

$10

This is for an DXF AND SVG FILES ONLY of the item below.

MIX TAPE COFFEE TABLE

ADDED 9/27/2018

ADDED 9/25/2017

$15

ADDED 9/21/2018

For my file sales, I am taking the taxes out on my end so you will not see the newly required sales tax on all internet sales (new Wisconsin state law).

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

PIG STOOL PLANS

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

$3

$15

ADDED 9/20/2018

ALSO PICTURED IS THE INSTRUCTION GUIDE FOR TOOL PATH CREATION

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

This is for an DXF AND SVG FILES ONLY of the item below.

DXF SIGN OUTLINE PACKAGE

ADDED 9/22/2017

This is for an SVG AND DXF FILE of the item below plus detailed PDF plan. This is designed to be made from 0.75" thick material (you may have to adjust the pockets for your material). All dog bone joints are hidden once assembled. All pockets to be milled 0.505" to 0.51"deep. THIS IS DESIGNED TO BE ABLE TO BE MADE WITH A 1/4" BIT. Finished stool is approx. 16" X 18.75" and 10" tall. You can also increase the size of the stool top outline if you use a glue up.

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

This is for an DXF AND SVG FILES ONLY of the item below.

FOR SALE

$5

This is for an SVG FILES ONLY of the item below. All art was drawn by myself. Includes three 12" x 20" layouts, each with the same wood type parts optimally laid out. designed to be made from Maple, Cherry, and Walnut plywood or solid wood. The face gets engraved and the beak and gobbler get inset like a puzzle. recommended for CO2 laser only.

$10

EXAMPLE OF SIGN MADE WITH ONE OF THE FILES. (OUTLINE ONLY)

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

INCLUDES:

19 INDIVIDUAL DXF SIGN PANEL VECTOR FILES
3 LOG SHAPES (LIKE THE EXAMPLE BELOW)
THUMBNAIL IMAGES INCLUDED FOR EVERY DXF

$10

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

NOW ONLY

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

ADDED 9/22/2017

This is for an SVG FILES ONLY of the item below. All line work has been redrawn by myself in AutoCAD, cleaned up, and made symmetrical. You will not find a cleaner plaque.

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

DESIGNS BY PHIL, LLC

& PLANS

*** NEW ADD TO CART MAKES MULTIPLE PURCHASES EASY!!! ***

NOW ONLY

$10

2 SIZES INCLUDED!

$3

ADDED 11/2/2018

$3

$10

ADDED 9/26/2018

2D FILES

This is for an SVG AND DXF FILE of the item below plus detailed PDF plan. This is designed to be made from 0.75" thick material (you may have to adjust the pockets for your material). All dog bone joints are hidden once assembled. All pockets to be milled 0.505" to 0.51"deep. THIS IS DESIGNED TO BE ABLE TO BE MADE WITH A 1/4" BIT. Finished stool is approx. 15.5" X 15.5" and 10" tall.

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

RETRO GAME CONTROLLER TABLE

NOW ONLY

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

HIPPO STOOL PLANS

NOW ONLY

After payment, you will receive 1 email with a zip file attached. Please allow up to 48 hours to receive the Email. This is non refundable. If I catch my model in any free forum, I will seek penalties.

NOW ONLY

LADYBUG DXF AND SVG SIGN

This is for an SVG AND DXF FILE of the item below plus detailed PDF plan. This is designed to be made from 0.75" thick material (you may have to adjust the pockets for your material). All dog bone joints are hidden once assembled. All pockets to be milled 0.505" to 0.51"deep. THIS IS DESIGNED TO BE ABLE TO BE MADE WITH A 1/4" BIT. Finished stool is approx. 11" X 20" and 10" tall. You can also increase the size of the stool top outline if you use a glue up.

PRINCESS DXF AND SVG SIGN

ADDED 10/11/2017

NOW ONLY

$5

BUTTERFLY DXF AND SVG SIGN

This is for an SVG AND DXF FILE of the item below plus detailed PDF plan. This is designed to be made from 0.75" thick material (you may have to adjust the pockets for your material). All dog bone joints are hidden once assembled. All pockets to be milled 0.50" to 0.51" deep. THIS IS DESIGNED TO BE ABLE TO BE MADE WITH A 1/4" BIT. Finished stool top is approx. 10.5" X 18" and 10" tall.

After payment, you will receive 1 email with a zip file attached. Please allow up to 48 hours to receive the Email. This is non refundable. If I catch my model in any free forum, I will seek penalties.

After payment, you will receive 1 email with a single zip folder. Please allow up to 48 hours to receive the Emails. This is non refundable. If I catch my model in any free forum, I will seek penalties.

$3

MOST FILES NOW AVAILABLE ON ETSY AS INSTANT DOWNLOADS!!!

$10

This is for an DXF, SVG, and PDF plans and files to build a Retro Game Controller table. There are no 3D files, but all cut shapes are in vector form PLUS highly detailed drawings so you could build one even without a CNC machine, but this is geared towards CNC. Some items are better off cut on a table saw. below are renderings and examples of 2 pages from the 6 page drawing that is included. All parts are overly dimensioned for clarity.

These are file that I drawn from scratch in AutoCAD. They may look similar to others, but they are my creation. I give you full open permission to profit from the items you create using these. I do NOT give you permission to resell or share these files. I will seek penalties for anyone caught doing so.

- Phil Johnson

$15

"FOOT" STOOL PLANS

This is for an DXF ONLY file of the items below. Can be used in easel, but needs to be converted in Inkscape or similar

This is for an DXF AND SVG FILES ONLY of the item below.

SEA TURTLE STOOL PLANS

This is for an DXF, SVG, and PDF plans and files to build a Mix Tape Coffee Table. There are also 3D files to carve the large screw heads, and all cut shapes are in vector form PLUS highly detailed drawings so you could build one even without a CNC machine, but this is geared towards CNC. I even include a cut list and how to cut the pieces out efficiently. This is designed to be made from both plywood and solid hard wood. I used Oak. Some items are better off cut on a table saw. below are renderings and pictures of one built from these plans.